Geeetech Wash and Cure 2 in 1 Machine, UV Resin Model Curing Box
Geeetech Wash and Cure 2 in 1 Machine, UV Resin Model Curing Box
SPECIFICATIONS
Item Type: Washing and Curing Machine
Model Number: GCW01 / GCW02
Power supply: 12V
UV lamp: 16 pcs / 16 pcs+3
Maximum power of UV lamp: 48W
UV lamp wavelength: 405nm
Washing/Curing time: 0~60min
Maximum washing size: 150mm*95mm*166mm
Power adapter: Input 100~240V, 50~60Hz, Output 12V/6A
Geeetech Washing and Curing Machine
GCW01 and GCW02 are the machine for cleaning and curing printed models. It uses high-power UV light source and touch operation. After processing the light-cured models, the models can achieve the best appearance and performance.
1.About GCW01
【2-In-1 Wash and Cure Function】Wash and Cure 2 in 1 design streamline the whole post-processing. Not only remove most of the chemicals, but also settle scrubbing of printing model and mess issues of your desk.
【Simple And Intelligent Control】GCW-01 Curing station has Built-in 16pcs 405nm UV curing light beads, work with the 360-degree rotating curing turntable, which can cure the entire model, 1-60min time adjustable, 0.96 inch TFT LCD screen can visually display the set time and the remaining time.
【High Compatibility 】Geeetech GCW-01 Wash and Cure machine can Compatible with most of the LCD/DLP/SLA 3D printers in the Market, which provides you ideal support for your 3D resin prints, will greatly enhance your work- efficiency.
【Diverse Washing Modes】There are 2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning;
2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin.The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
【Anti-UV Light Hood】The transparent cover of this wash cure machine can block up to 99.95% , When picking up the cover in the working state, it will suspend operation and emit a beeping sound. The wash and curing box also adopts sealed cleaning, which prevents the cleaning agent from splashing and volatilization, more safety.
Technical Specification
1. Model Switch: Wash & Cure
2. Contrl Method:Touch Button
3. Maximum Washing Size: 150mm*95mm*166mm
4. Maximum Curing Size: 140(φ)*166mm
5. UV Lamp Wavelength: 405nm
6. Product Weight: 3.3kg
7. Power Supply:12V
8. Rated Power:48W
9 Power Adapter: Input 100~240V, 50~60Hz, Output 12V/6A
Operation Instructions
1. None of the function works without the protective cover on, do not tear off the yellow label on the hood, otherwise the machine won’t able to run.
2. Please don't pour detergent on the work platform in the cleaning mode to avoid damage to the equipment.
3. Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
1.About GCW02
【2-IN-1 Machine】Wash and Cure 2 in 1 design promise the customer a good and smoothly using experience.The operating process is now more efficiency with less effort to meet your different needs.
【Newest Upgraded Intelligent Curing Control】 Loaded with 16pcs 405nm UV lamp beads, also added three more additional UV lamp right at the bottom under the plate,and work together with the 360°rotating curing turntable,the bottom curing has no dead ends, which can cure the models evenly and more thoroughly.
【Updated Appearance and Function】 GCW02 adopts a far more gracious appearance. Coming with a colored screen which can visually display the set time and the remaining time, and a knob with RGB breathing light makes operation more convenient.
【Tightly Sealed Anti-UV Light Hood With Automatic Protection】 The cover can block 99.99% of ultraviolet rays to protect your vision and avoiding the leakage and volatilization of the splashing liquid. With an intelligent detection sensor, picking up the cover in the operating state will suspend operation auomaticly and emit a beeping sound,and will resume working once the hood is covered back.
【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, ANYCUBIC Photon, QIDI Shadow, NOVA3D, and other regular resin printers with similar build volume size as it does for photon series, which provides you an ideal support for your 3D resin prints.
Technical Specification
1. Power Supply: 12V
2. Power Adapter: Input 100~240V, 50~60Hz, Output 12V/6A
3. UV Lamp: 16+3pcs
4. Maximum Power of UV lamp: 66W
5. UV Lamp Wavelength: 405nm
6. Washing/Curing Time: 0~60min
7. Maximum Curing Size: 140(Φ)*166mm
8. Maximum Washing Size:150mm*95mm*166mm
High Curing Speed
Powerful 16+3 405nm UV lamp beads makes UV light distribution is more uniform, model will cure faster,compeletely and surface more smoothly.
Curing more thoroughly
The rotatable curing platform whirl the entire model 360° when curing,the print will be cured more thoroughly.
Flexible to use
It makes the operation more convenient for users,save a lot of time after printing.
Curing Size: 140(Φ)*166mm
Washing Size: 150*95*166mm
Simple Operation
The ergonomic design with touchable button and knob,you can adjust the washing and curing time according to your model actual situation.